http://albuquerque.craigslist.org/tls/ en-us Copyright © 2009 craigslist, inc. webmaster@craigslist.org webmaster@craigslist.org http://albuquerque.craigslist.org/tls// craigslist | tools in albuquerque Collection 2009-12-06T11:12:17-08:00 4 hourly http://albuquerque.craigslist.org/tls/1497634972.html 2009-12-06T11:50:23-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497634972.html text 2009-12-06T11:50:23-07:00 http://albuquerque.craigslist.org/tls/1497579558.html Category: SuperCut_
Purpose: 50AMP 120/220Volt 50/60Hz Plasma Cutter. Cuts 1/8" to 1"
Technology:
Mosfet Technology with Fuji or Toshiba Mosfets
Specification
Operating Voltage:
208/220vac 50/60HZ Input Single Phase 1PH
110/120vac 50/60HZ Input Single Phase 1PH
50amp cut draws 25Amps
40amp cut draws 22.5Amps
230V No Load Voltage, 100-115V Working Voltage

Cutting Specs:
3" Per minute @ 1" Steel (Severance Cut)
7" Per minute @ 3/4" Thick Steel
17" Per minute @ 1/2" Thick Steel

High Frequency and Contact Start:
High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. This 50amp Inverter Plasma cutter cuts like a 60amp standard DC plasma cutter! High Frequency Plasma cuts faster with less distortion in your metal.

Power Specs:
Power Factor 0.93
100% Duty cycle (cut time) at 40amp cut
60% Duty cycle at 50amp cut setting

Air requirements: 60-75psi @ 4.5cfm
Internal High Speed Cooling Fan to Regulate Temperature
Has built in Thermal & Overload Protection

Weight: 28LBS (30LBS Boxed)
Dimensions: 15"Length X 9"High X 6"Wide

What is Included?

* Main Unit
* Cutting Torch
* Earth Clamp
* Air Regulator with Bracket
* Air Hose
* Consumables: 10 piece tips, 10 piece electrodes, 5 piece gas diffuser, 5 piece shield cups
253- 9 5 1 - 1 9 45 ****THIS IS STILL AVAILABLE****** also have a NEW 200amp acdc Tig Welder available for $975



]]> 2009-12-06T11:13:24-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497579558.html text 2009-12-06T11:13:24-07:00 http://albuquerque.craigslist.org/tls/1497541998.html
Mostly a box of 1 1/2" finish nails and a box of 2" brads. The Finish nails are about 3/4 full and the brads are almost completely full.

asking $20

Please call 505-410-4628 if interested]]> 2009-12-06T11:03:18-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497541998.html text 2009-12-06T11:03:18-07:00 http://albuquerque.craigslist.org/tls/1497518120.html
Asking $40

Please call 505-410-4628 if interested.]]> 2009-12-06T11:02:01-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497518120.html text 2009-12-06T11:02:01-07:00 http://albuquerque.craigslist.org/tls/1497561071.html I will try to post some actual pics but have put a generic one for now all is in good shape and working order asking $850.00 obo have found on eBay for more and they are in a lot worse shape than this one and
sell for over 2k new
if interested call Ben @ 450-9881
Thanks]]> 2009-12-06T11:01:21-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497561071.html text 2009-12-06T11:01:21-07:00 http://albuquerque.craigslist.org/tls/1497445088.html ]]> 2009-12-06T09:39:23-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497445088.html text 2009-12-06T09:39:23-07:00 http://albuquerque.craigslist.org/tls/1497420921.html 2009-12-06T09:21:01-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497420921.html text 2009-12-06T09:21:01-07:00 http://albuquerque.craigslist.org/tls/1497396360.html ryobi 16" jig saw $45
wood working bench with vise at one end
laminated top $80

]]> 2009-12-06T09:07:00-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497396360.html text 2009-12-06T09:07:00-07:00 http://albuquerque.craigslist.org/tls/1497388118.html 2009-12-06T08:57:18-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497388118.html text 2009-12-06T08:57:18-07:00 http://albuquerque.craigslist.org/tls/1497383493.html 2009-12-06T08:56:52-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497383493.html text 2009-12-06T08:56:52-07:00 http://albuquerque.craigslist.org/tls/1497389304.html For questions call Greg. 440-8834 ]]> 2009-12-06T08:55:22-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497389304.html text 2009-12-06T08:55:22-07:00 http://albuquerque.craigslist.org/tls/1497386747.html 2009-12-06T08:53:12-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497386747.html text 2009-12-06T08:53:12-07:00 http://albuquerque.craigslist.org/tls/1497372376.html Robin air cooled, four cycle gasoline engine, 650 blows/min., 2,850 lbs./blow, weighs 185 lbs. mix 32:1 ratio w/outboard motor oil.
505-898-6908]]> 2009-12-06T08:40:22-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497372376.html text 2009-12-06T08:40:22-07:00 http://albuquerque.craigslist.org/tls/1497365216.html 2009-12-06T08:33:49-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497365216.html text 2009-12-06T08:33:49-07:00 http://albuquerque.craigslist.org/tls/1497364229.html asphalt patching work and others. 4 filtration air cleaner, corrosion proof poly fuel tank, weighs 185 lbs. impact force of 3,950 pounds.
Driven by a 3.5-hp Robin engine, the unit is fuel efficient and quiet. It delivers 698 blows per minute. The rammer travels at 36 feet per
minute and can compact a maximum area of 2,000 square feet per hour. Paid $ 2,900.00 brand new, never put into service!
505-898-6908 ]]> 2009-12-06T08:32:57-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497364229.html text 2009-12-06T08:32:57-07:00 http://albuquerque.craigslist.org/tls/1497357747.html perfect for construction (on the job site), air tools, very portable
Features
•HORSE POWER : 1.5 HP
•CFM DISPLACED @ 100 PSI : 10.1 CFM
•CFM DELIVERED @ 100 PSI : 6.9 CFM
•MOTOR RPM : 1755 RPM
•PUMP RPM : 780 RPM
•PUMP OIL CAPACITY : 34 Ounces
•REED VALVE SYSTEM : Yes (Standard)
•AUTOMOTIVE STYLE INSERTS : Yes (Standard)
•WHEELS : 1 Flat Free Tire
•TANK CAPACITY : 9 Gallons
•LENGTH : 46 Inches........•WIDTH : 19 Inches........•HEIGHT : 28 Inches.........•SHIPPING WEIGHT : 174 lbs.
Includes
•Rol-Air 5715K17-CS Portable Air Compressor
•3/8" Regulator and Guage
•Constant run control]]> 2009-12-06T08:26:56-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497357747.html text 2009-12-06T08:26:56-07:00 http://albuquerque.craigslist.org/tls/1497356659.html 505-898-6908]]> 2009-12-06T08:26:00-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497356659.html text 2009-12-06T08:26:00-07:00 http://albuquerque.craigslist.org/tls/1497336618.html 2009-12-06T08:06:17-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497336618.html text 2009-12-06T08:06:17-07:00 http://albuquerque.craigslist.org/tls/1497289299.html 2009-12-06T07:10:03-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497289299.html text 2009-12-06T07:10:03-07:00 http://albuquerque.craigslist.org/tls/1497237292.html
Brand new, never used.

Call Paul: 268 9734]]> 2009-12-06T05:16:40-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497237292.html text 2009-12-06T05:16:40-07:00 http://albuquerque.craigslist.org/tls/1497082689.html 2009-12-05T21:33:52-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497082689.html text 2009-12-05T21:33:52-07:00 http://albuquerque.craigslist.org/tls/1497081549.html 2009-12-05T21:32:14-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497081549.html text 2009-12-05T21:32:14-07:00 http://albuquerque.craigslist.org/tls/1497046793.html Max depth of cut 1/16
Max width 12”
Min stock thickness ¼
Max stock thickness 6”
Comes with an extra set of new knives and Planer Pal knife setting Jig. This is a great portable machine that is ready for immediate use.

Taylor Ranch


]]> 2009-12-05T20:46:06-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1497046793.html text 2009-12-05T20:46:06-07:00 http://albuquerque.craigslist.org/tls/1496962378.html 2009-12-05T19:10:33-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496962378.html text 2009-12-05T19:10:33-07:00 http://albuquerque.craigslist.org/tls/1496765790.html 2009-12-05T16:16:31-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496765790.html text 2009-12-05T16:16:31-07:00 http://albuquerque.craigslist.org/tls/1496770868.html 5" porter cable orbital sander never used ==50.0kerosene/diesel jobsite heater works great==50.00
14.4v.Dewalt 1/2" drill works good==50.00
David white laser level with tripod and measuring rod==250.00
come-along new==10.00
I also have many,many hand tools and other power tools.
Tell me what you may need and I probably have it
Rick.......505-331-0851 or 505-771-0277 ]]> 2009-12-05T16:15:41-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496770868.html text 2009-12-05T16:15:41-07:00 http://albuquerque.craigslist.org/tls/1496709791.html Very large metal storage locker (military style).....
7 ft tall! the overall dimensions are 2 ft deep x 7 ft tall x 3 ft wide.
has shelves, drawers , hanging bar, doors. Everything works!!
It's taking up space in my garage and MUST go!
email me or call 505-268-8408 and leave a message if you are interested
in buying this great storage locker.

I am available to show it/ sell it Thurs or Fri AM.

ps did I mention it is VERY LARGE?!? and heavy. come prepared to lift and
transport it yourself. $125 cash only please.

Thank You!!! ]]> 2009-12-05T15:28:18-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496709791.html text 2009-12-05T15:28:18-07:00 http://albuquerque.craigslist.org/tls/1496617031.html
Top left: SuperKnife SK2 linerlock with blue anodized aluminum handle. The original, the real deal, not a knockoff, just an uncommon color. 3-7/8" closed. Uses standard or contractor grade utility knife blades.

Features:

·Stainless steel utility blade
·Ambidextrous thumb disc
·Lanyard hole
·Pocket clip

New, unused, in the original package. $12

Top right: SuperKnife linerlock SK Edge, "Winchester" branded with black rubber handle. 3-3/4" closed. Uses standard and contractor grade utility knife blades.

Features:

·Stainless steel utility blade
·Thumb stud
·Lanyard hole
·Pocket clip

New, unused, in the original package. $12

Bottom left: Genuine Leatherman "Micra", all stainless steel, 2.5" closed, 1.8 oz.

Tools:

420HC Clip Point Knife
Extra-small Screwdriver
Medium Screwdriver
Flat Phillips Screwdriver
Spring-action Scissors
Nail File/Cleaner
Bottle Opener
Ruler
Tweezers

Refurbished, in as-new condition. $15

Bottom right: Micro-size multitool with pliers. Includes case. 2-3/4" closed

Features:

·100% stainless steel construction
Pliers
Small, medium and large screwdrivers
Phillips screwdriver
Can opener
File

New, Unused, in original packaging. $12]]> 2009-12-05T14:21:48-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496617031.html text 2009-12-05T14:21:48-07:00 http://albuquerque.craigslist.org/tls/1496511714.html This is a NEW, never opened, wet/dry, SHOP VAC...Quiet Plus Series, 12 Gal/5.0 Peak HP, model 85L500.
The following accessories and filters are included:
* 6' - 2 1/2" Hose
* (2) 2 1/2" Extension Wands
* 8" Utility Nozzle
* Tool Holder
* Filter Disc with Mounting Ring
* Foam Sleeve
This shop vac has a powerful bypass motor with quieter operation. It has convenient top and side carry handles. The inlet accepts 2 1/2" and 1 1/4" hose. It has an easy reach on/off switch, rear tool and cord storage, 4-casters, low profile, stable design, and an extra large lid that latches for easy emptying. The plastic tank is dent and rust resistant.
Again, this is a new, never opened shop vac for only $45...check prices on the internet! Would make a great gift.
Cash only, local buyer may call 891-0655 for directions for pick up. ]]> 2009-12-05T13:19:12-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496511714.html text 2009-12-05T13:19:12-07:00 http://albuquerque.craigslist.org/tls/1496430523.html 2009-12-05T12:26:51-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496430523.html text 2009-12-05T12:26:51-07:00 http://albuquerque.craigslist.org/tls/1496379759.html
Thanks
Kevin]]> 2009-12-05T11:58:03-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496379759.html text 2009-12-05T11:58:03-07:00 http://albuquerque.craigslist.org/tls/1496358015.html 2009-12-05T11:46:21-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496358015.html text 2009-12-05T11:46:21-07:00 http://albuquerque.craigslist.org/tls/1496257206.html
I need space in the shop and I never use it.

Cart has been used for less than a yr in my garage at home.

I do not have keys for either box...but I'm still looking.

Any questions, please let me know.

Price is firm.

Thanks

400-6062 or email thru Craigs
]]> 2009-12-05T10:50:32-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496257206.html text 2009-12-05T10:50:32-07:00 http://albuquerque.craigslist.org/tls/1496247244.html 2009-12-05T10:44:59-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496247244.html text 2009-12-05T10:44:59-07:00 http://albuquerque.craigslist.org/tls/1496220805.html

Image hosting for craigslist

Image hosting for craigslist

]]> 2009-12-05T10:30:19-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496220805.html text 2009-12-05T10:30:19-07:00 http://albuquerque.craigslist.org/tls/1496209317.html

Image hosting for craigslist

]]> 2009-12-05T10:24:09-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496209317.html text 2009-12-05T10:24:09-07:00 http://albuquerque.craigslist.org/tls/1496192680.html MUST SELL FAST!!
Includes owners manual, programming manual, tooling and static phase converter.

Can transport for extra charge, depending on location distance.

EQUIPPED WITH: Ultimax II Conversational CNC Control w/Dual CRTs, Tooling Package, Dual RS-232C Ports, Axis Jog Handwheel, Coolant System.
CATALOGUE SPECIFICATIONS:
Table Working Surface................................ 12" x 42"
Table Load Capacity.................................. 500 LBS
Longitudinal Travel (X-Axis)......................... 24"
Cross Travel (Y-Axis)................................ 13.7"
Vertical Travel (Z-Axis)............................. 5"
Knee Travel (Manual)................................. 15.5"
Ram Travel........................................... 14"
Maximum Clearance Table Top to Spindle Nose.......... 19"
Maximum Feed Rate, All Axes.......................... 150 IPM
Rapid Traverse Rate, All Axes........................ 250 IPM
Spindle Horsepower................................... 3 HP
Spindle Speeds, Range................................ 60-4000 RPM
Spindle Taper........................................ Universal #200
Approximate Machine Dimensions....................... 98" x 101"
Approximate Machine Height........................... 83"
Approximate Machine Weight........................... 2,900 LBS

Condition: Good. Used daily.

CALL 505-450-6981 MARSHALL For any further questions THANKS FOR LOOKING!]]> 2009-12-05T10:15:17-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496192680.html text 2009-12-05T10:15:17-07:00 http://albuquerque.craigslist.org/tls/1496187583.html 2009-12-05T10:13:25-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496187583.html text 2009-12-05T10:13:25-07:00 http://albuquerque.craigslist.org/tls/1496170259.html 2009-12-05T10:02:20-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496170259.html text 2009-12-05T10:02:20-07:00 http://albuquerque.craigslist.org/tls/1496120100.html New van ladder rack

Near new Van shelving....4 sections

Almost new Milwaukee 1/2 angle drill w/carrying cas

older 10" Craftsman table saw

steel for 60LB Bosch hammer....points-chisels-spades

heavy duty airless spray system 65-1 motor, tank and hoses ......make offer

older 5 telephone system with main switch gear

too many to list ....ask for more info. any reasonable offer considered

Call Bob at 505-948-4500 to make appointment to see tools

all tools are in excellent condition, new or near new....check them out....cash only

PLEASE....NO EMAIL OR TEXT MESSAGES]]> 2009-12-05T09:33:30-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496120100.html text 2009-12-05T09:33:30-07:00 http://albuquerque.craigslist.org/tls/1496100249.html works great. in good used condition

125.00 obo cash only]]> 2009-12-05T09:21:32-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496100249.html text 2009-12-05T09:21:32-07:00 http://albuquerque.craigslist.org/tls/1496031162.html
Call Steve (505) 750-2402]]> 2009-12-05T08:40:38-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496031162.html text 2009-12-05T08:40:38-07:00 http://albuquerque.craigslist.org/tls/1496029117.html

Picture hosting for craigslist

Post big pictures on craigslist

]]> 2009-12-05T08:35:43-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496029117.html text 2009-12-05T08:35:43-07:00 http://albuquerque.craigslist.org/tls/1496005038.html 2009-12-05T08:20:16-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1496005038.html text 2009-12-05T08:20:16-07:00 http://albuquerque.craigslist.org/tls/1495970994.html 2009-12-05T07:51:45-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495970994.html text 2009-12-05T07:51:45-07:00 http://albuquerque.craigslist.org/tls/1495957349.html 2009-12-05T07:39:43-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495957349.html text 2009-12-05T07:39:43-07:00 http://albuquerque.craigslist.org/tls/1495955664.html 2009-12-05T07:38:09-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495955664.html text 2009-12-05T07:38:09-07:00 http://albuquerque.craigslist.org/tls/1495915669.html ASKING $250.00 OBO
CALL 505-832-1235]]> 2009-12-05T06:59:34-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495915669.html text 2009-12-05T06:59:34-07:00 http://albuquerque.craigslist.org/tls/1495904775.html 2009-12-05T06:43:23-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495904775.html text 2009-12-05T06:43:23-07:00 http://albuquerque.craigslist.org/tls/1495890422.html

Post pictures on craigslist

Post images on craigslist

]]> 2009-12-05T06:22:45-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495890422.html text 2009-12-05T06:22:45-07:00 http://albuquerque.craigslist.org/tls/1495857731.html 2009-12-05T05:11:31-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495857731.html text 2009-12-05T05:11:31-07:00 http://albuquerque.craigslist.org/tls/1495813440.html THIS IS NOT CHEAP CHINESE CRAP!!! Nor is this a 3 or 4 in 1 unit. This is a real American made quality tool.
This would make a good Christmas present for someone you know!]]> 2009-12-05T01:42:31-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495813440.html text 2009-12-05T01:42:31-07:00 http://albuquerque.craigslist.org/tls/1495794236.html 2009-12-05T00:41:53-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495794236.html text 2009-12-05T00:41:53-07:00 http://albuquerque.craigslist.org/tls/1495792920.html 2009-12-05T00:37:32-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495792920.html text 2009-12-05T00:37:32-07:00 http://albuquerque.craigslist.org/tls/1495777136.html






]]> 2009-12-04T23:59:31-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495777136.html text 2009-12-04T23:59:31-07:00 http://albuquerque.craigslist.org/tls/1495695627.html
FramePro 601 Clipped Head Nails
SENCO

NEW! Best Value in the Industry!
Clipped head nailers provide all the important features you want at an affordable price. These compact framers are easy to handle, and easy on the arm. Their 30° short, in-line magazines provide excellent maneuverability and line of sight. These powerful framers drive a wide range of fasteners in four gauges (.113—.148) from 2"—3-1/2" to handle virtually any job.


TOOL SPECIFICATIONS
Height: 13.5"(343 mm)
Length: 14.8"(376 mm)
Weight: 8 lb( 3.6 kg)
Reg. Operating Pressure: 70—120 psig (4.8—8.3 bar)
Collation:
Mode of Operation: Contact or Sequential Actuation


Drives 2"-3-1/2" smooth shank nails (Sencote® or plain) and 2"-3" ring shank nails. Shank diameters include .113, .120, .131, and .148



FEATURES AND BENEFITS PROJECTS MORE INFORMATION
Sawtooth safety that digs in for precision toenailing
Shorter, straight-line 30° magazine for better line of sight and superior maneuverability
Drives ring and smooth shank nails in four gauges (.113—.148) from 2"—3-1/2"
Reliable internal design with full round driver
Adjustable exhaust
Lightweight and powerful
Adjustable depth-of-drive control
Soft grip handle reduces fatigue
One-year warranty
Siding
Framing
Decking
Fencing
Pallets and Pallet Repair
Sidewall Sheathing
Subflooring
Trusses
Framing and Sheathing
Crate and Box Assembly
Product Sheet
Operation's Manual
Line Art
Part Charts
Product Registration/Warranty


Please email or call 294-4418 if interested.


DO NOT SEND SPAM!!!

]]> 2009-12-04T21:47:42-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495695627.html text 2009-12-04T21:47:42-07:00 http://albuquerque.craigslist.org/tls/1495672642.html 2009-12-04T21:20:37-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495672642.html text 2009-12-04T21:20:37-07:00 http://albuquerque.craigslist.org/tls/1495646747.html 2009-12-04T20:46:35-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495646747.html text 2009-12-04T20:46:35-07:00 http://albuquerque.craigslist.org/tls/1495622965.html This rack was built by BDA custom trailer in Albuquerque
$450.00
505-975-0167]]> 2009-12-04T20:21:10-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495622965.html text 2009-12-04T20:21:10-07:00 http://albuquerque.craigslist.org/tls/1495572510.html i have 3 extra bushings still in pkg. this saw is selling on ebay for 100.00 so easy money maker for someone if they want to resale 75.00 firm your getting a steal
]]> 2009-12-04T19:31:52-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495572510.html text 2009-12-04T19:31:52-07:00 http://albuquerque.craigslist.org/tls/1495526655.html
Model 3613-20. Contour. Serial number 399-79112. manufacture date 1979.

What makes this machine different than all the other 36" band saws you are looking at is the fact that it is set up to run on SINGLE PHASE power (220V).

It can also be run on 3 phase (208/240v) power if that's what you've got.

As far as i can tell, the machine was factory converted from the usual 3 phase motor/piulley set up, to a 3Hp, 180V electronically DC controlled, infinitely variable speed motor.

This allows it to be run on both SINGLE AND THREE PHASE POWER. Just wire your power cable in as needed.

This conversion simplifies speed selection by eliminating all the hand cranking. Just turn the dial to the speed you want.

All the typical pulleys, belts, and other moving parts and handles that you find inside the older Doalls have been eliminated. This simplificxation makes for a more reliable and maintenance-free tool with less noise.

As you can see in the photo, the motor is a little long to fit the standard back cover, so a hole was cut in the back to allow fitment and cooling of the TEFC motor.

The machine has been repainted gray over what was once green and yellow.

The machine can run both bandsaw blades as well as file blades. Blade size is 175" on three wheels. It can also be run with just 2 wheels with a 125" blade.

Speed range is 0 to 5200 Feet Per Minute. It has a two-speed transmission which is operated by a lever on the left side of the saw the saw.

Once high or low is selected, simply turn the variable speed dial (above the table) to whatever speed you need.

Basically you can cut any material from wood to steel to exotic materials given the right speed, feed and blade.

The saw runs smooth and quiet at any speed.

The welder is a (DoAll) DBW-15 and has the blade shear as you can see.

The saw has a chip blower which uses standard airline from your compressor. It has a regulator inside the machine to set your air pressure. You should only have to go in to the back once to set it, then forget it.

The machine is about six feet wide (including the table) and just under 4 feet deep. Height is about 6 feet. Throat is about 35" with about 13" cutting height. Weight is about 2200 lb

$4500 OBO. DELIVERED to your garage or shop in the Albuquerque area.

Weighs about 2200 lb. Shipping available to anywhere in the Continental US.

Please check my other offerings abqtool.com forother mills, lathes, welders, saws, etc.

Machine is still available if the listing is still up.

Call Art at 505-259-8310 or John (505-880-1540) with any questions. Thanks. ]]> 2009-12-04T18:49:11-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495526655.html text 2009-12-04T18:49:11-07:00 http://albuquerque.craigslist.org/tls/1495523136.html
Manufacture date 1980. Made in Korea, but don't let that sway you. This is a very high quality, rigid lathe that you can make serious cuts on and hold tight tolerances.

Rebuilt internally by our in house tool & die maker. All bearings, gears, ways, etc very good.

This machine is in excellent running condition, and has been completely gone through and checked out. The ways, bearings, etc are very good.

This machine has a 16" swing and approximately 40+" between centers making it an excellent machine for general shop/repair shop use. It has power longitudinal and cross feeds. MT4 tail stock.

The lathe has a 5Hp motor, and runs on 208/240v 3 phase power.

We can set it up for single phase use for $200 should you require it.

The machine is very heavy at 3350 lb and has plenty rigidity and more than enough power to make accurate, heavy cuts.

The machine has 12 speeds from 50 to 1850 rpm. Quite a nice range for this type of machine.

American standard threading from 7 to 128 tpi.

The 2" hole through is large enough for reasonably large shafts.

The machine is equipped with an 8" 3 jaw chuck with 2 piece master hard jaws..

Also included is a new Quick Change toolpost with holders ,live center, and keyless drill chuck, and parts manual. Interestingly, most parts ARE available out of California.

Physical size is about 90" wide and 30" deep

$5500 + tax OBO DELIVERED to your local Albuquerque home or shop.

Shipping available to anywhere in the Continental US. approx 3350 lb)

The unit is still available if the listing is still up.

Call Art at 505-259-8310 or John (505-880-1540) with any questions. Thanks. ]]> 2009-12-04T18:46:07-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495523136.html text 2009-12-04T18:46:07-07:00 http://albuquerque.craigslist.org/tls/1495519220.html
If you're looking for an all-in-one killer machine, this is it.

The 300A Shopmaster 300 power supply does AC/DC and CC/CV and is rated at 50% duty cycle at maximum current.

Currently set up for 220V SINGLE PHASE. Just plug it into the biggest 220V circuit you have :) It'll run quite happily on a 50A breaker.

Includes an S-21E MIG wire feeder, with new Miller mig gun. Set up for .035-.045" wire.

Also included is a Miller HF-251D-1 TIG High Freq unit and TIG gun

The setup includes everything except the regulator and tank. All the leads, guns, foot feed you see are included.

Custom shop-built rolling cart rounds out the setup.

Everything works great and is ready for production or small shop use.

A setup like this new runs well over $5k, so take advantage.

$2250 OBO. Delivery to local Albuquerque area available.

+++++++++++++++++

NOTE: I will be happy to sell this machine in other configurations, or just the parts you need. For example-if you need just the power supply and MIG set up, or the tig setup, or just the power supply, feeder or high freq unit. Let me know what you need.

+++++++++++++++++

Weighs about 575 lb. with everything. Shipping available to anywhere in the Continental US.

The unit is still available if the listing is still up.

Call Art at 505-259-8310 or John (505-880-1540) with any questions. Thanks. ]]> 2009-12-04T18:42:44-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495519220.html text 2009-12-04T18:42:44-07:00 http://albuquerque.craigslist.org/tls/1495517432.html
In excellent working and cosmetic condition.

Machine was built 1989 and has NEAR PERFECT WAYS. 9" x 42" table has a few mill marks.

Almost an exact replica of a Bport, 2Hp 2J head (older style witth crank handle variable speed control).

Infinitely variable speed from 60-4500 rpm. R-8 quill.

Machine is 3 phase, but can be equipped with a phase converter and wired for 220V SINGLE PHASE should you require that.

Machine is complete with Acu-rite 2 Axis (XY) DRO reading to a half thousandth (.0005")

Machine also sports an ACTUAL SERVO X axis power feed and built-in ONE-SHOT LUBE system.

ACTUAL KURT 6" machine vise, complete (new) clamp set, drill chuck and set of R8 collets 1/8 to 3/4" by 1/8ths also included.

Completely gone through and checked out fully. Runs out very good.

The machine is quite "tight". Handles have very little "play".

$3250 OBO. DELIVERED to your garage or shop in the Albuquerque area.

Weighs about 2100 lb. with everything. Shipping available to anywhere in the Continental US.

Please check my other offerings abqtool.com forother mills, lathes, welders, saws, etc.

Machine is still available if the listing is still up.

Call Art at 505-259-8310 or John (505-880-1540) with any questions. Thanks. ]]> 2009-12-04T18:41:11-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495517432.html text 2009-12-04T18:41:11-07:00 http://albuquerque.craigslist.org/tls/1495515695.html
Fairly well used with mill marks on the table.

Might be a nice unit for rural/farm use, or for a hobbyist to have a real mill for cheap.

J Head step pulley design with 8 speeds.

9" x 42" table.

1 Hp 3 phase motor equipped with phase converter to run on standard 220v house current.

Machine has X axis power feed.

Equipped with vise, clamps and new set of R-8 collets.

$1500 DELIVERED to your garage or shop in the Albuquerque area.

Please check my other offerings abqtool.com forother mills, lathes, welders, saws, etc.

Machine is still available if the listing is still up.

Call Art at 505-259-8310 or John (505-880-1540) with any questions. Thanks. ]]> 2009-12-04T18:39:41-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495515695.html text 2009-12-04T18:39:41-07:00 http://albuquerque.craigslist.org/tls/1495429085.html Boxes are in pretty good shape but do have some scratchs
1 box has the original lock the other has a paddle lock mount
505-975-0167

]]> 2009-12-04T17:29:25-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495429085.html text 2009-12-04T17:29:25-07:00 http://albuquerque.craigslist.org/tls/1495391679.html 2009-12-04T17:00:23-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495391679.html text 2009-12-04T17:00:23-07:00 http://albuquerque.craigslist.org/tls/1495384520.html 2009-12-04T16:55:11-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495384520.html text 2009-12-04T16:55:11-07:00 http://albuquerque.craigslist.org/tls/1495369883.html Variable speed 60-4200 rpm spindle. 9" X 42" table. 1 1/2 HP Motor. 3 phase power.
Machine is in pretty good shape for a 30 year old piece of equipment. Can see and test under power.
*Note: Has Bridgeport power feed on X axis but it is not working (gears have been removed). Axis are tight and spindle sounds really good.

Email here if interested and I will contact you as soon as I can.
]]> 2009-12-04T16:43:44-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495369883.html text 2009-12-04T16:43:44-07:00 http://albuquerque.craigslist.org/tls/1495352713.html


Complete, operating and in excellent to like new condition.

There have been a number of these units for sale lately, but if you followup on them ,you'll note they are: missing pieces, won't work, or were used hard and put away dirty.


Cost $2300 new today. What a Christmas present and 70% off list.

Looks like it was hardly used. Many of these machines were purchased and hardly used.



They sat around for years collecting dust. This looks like one. I have another one like it or I wouldn't sell it.



Come take a look. You won't be dissappointed.







Located near Intel.



Call 917-8010 or 896-1908







]]> 2009-12-04T16:30:58-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495352713.html text 2009-12-04T16:30:58-07:00 http://albuquerque.craigslist.org/tls/1495340287.html For Shopsmith Bandsaw, Beltsander, jigsaw, Scrollsaw, Jointer etc.

$150. Has wheels on one end for moving about shop.

1/.2 HP Dayton motor. Used to power SHOPSMITH attachments.

All US made. Heavy. Original list price approx $365 plus shipping.

Located near Cottonwood Mall.

Call 917-8010 or 896-1908.]]> 2009-12-04T16:22:07-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495340287.html text 2009-12-04T16:22:07-07:00 http://albuquerque.craigslist.org/tls/1495333936.html Heavy old style construction. Weighs 28 lbs. Premier "Rapido" quick release type. Jaws are 7" wide 4" tall and open to 8".
Turn handle CCw and it releases and allows front jaws to be quickly slid forward opening the vise.
Pushing the jaws in by hand to close on wood, then turn handle CW to tighten.
Has built in "dog", and metal (aluminum) handle with steel end caps.
These sell for upwards of $200.
Excellent condition. Nothing missing,broken.
Located near Intel.
Call 917-8010, or 896-1908.

]]> 2009-12-04T16:17:43-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495333936.html text 2009-12-04T16:17:43-07:00 http://albuquerque.craigslist.org/tls/1495301603.html Clearing out shop I have the some great tools in excellent condition. Most all of these were rated as number 1 or number 2 by Fine Wood Working. I searched craigslist for these tools, but never found any so all items were purchased new. Trust me these tools do not become available used very often.
If someone is interested and wants my entire shop make me an offer and I will throw in a ton of extras not listed. CASH ONLY, NO SHIPPING, PICK UP ONLY, NO SCAMMERS

Here is what I got:

Powermatic pm2000 table saw 3hp 2 forest blades $1,250
Freud 8” Dado set $125
Woodcraft Tenoning jig $35
Grizzly Model G0490 8” Jointer spiral head SOLD
Rigid tpl1300LS planer 13” SOLD
Bosch 1618 Router Plunge & Standard with edge guide & adapters Sold
Porter Cable 690 router Sold
Porter Cable 4212 dove tail jig Sold
Rigid Oscillating Spindle/belt sander EB44241 SOLD
Steel City 17" Drill Press 20520 Sold
Steel City Hollow Chisel Mortiser Sold
12" Craftsman Bandsaw 3/4 HP w/extra blades SOLD
Fuji HLVP sprayer 4stage, flex end, tree tips, small & large cups $400
Jet Slow Speed Wet Sharpener with popular Jigs Sold
Jet DC-1100A dust collector w/canister filter extra bags and hose SOLD
Bessy K body clamps various sizes price each $25 4 left
Misc wood clamps pirce each $10


Misc
Bloom heavy duty under mount drawer guides 6pr $60
Sharpening stones $20
Assembly table $100
workbench $25
Oak $2 bdft. Sold
Mahagony $4dbft. Sold
Maple $3bdft. Sold
]]> 2009-12-04T15:55:59-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495301603.html text 2009-12-04T15:55:59-07:00 http://albuquerque.craigslist.org/tls/1495250460.html 2009-12-04T15:22:01-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495250460.html text 2009-12-04T15:22:01-07:00 http://albuquerque.craigslist.org/tls/1495234649.html 2009-12-04T15:12:02-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495234649.html text 2009-12-04T15:12:02-07:00 http://albuquerque.craigslist.org/tls/1495205180.html 2009-12-04T14:54:21-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495205180.html text 2009-12-04T14:54:21-07:00 http://albuquerque.craigslist.org/tls/1495073713.html
MAKE OFFERS!!!

PLEASE CALL 505-983-4469 FOR ADDITIONAL INFORMATION.]]> 2009-12-04T13:38:19-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1495073713.html text 2009-12-04T13:38:19-07:00 http://albuquerque.craigslist.org/tls/1494986596.html Includes 1.5 HP, 115/230 Volts, 60 hz, 3450 RPM, 14/7.0 Amps, Single Phase motor, on-off key lock switch and overload protection, set of legs with added wheels for use in shop, automatic mechanical brake, blade guard with anti-kickback attachment, retractable leaf guard, 12" combination blade, wrenches. Great saw for shop use and in good working condition.]]> 2009-12-04T12:49:28-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494986596.html text 2009-12-04T12:49:28-07:00 http://albuquerque.craigslist.org/tls/1494863167.html 2009-12-04T11:44:17-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494863167.html text 2009-12-04T11:44:17-07:00 http://albuquerque.craigslist.org/tls/1494843294.html 2009-12-04T11:33:54-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494843294.html text 2009-12-04T11:33:54-07:00 http://albuquerque.craigslist.org/tls/1494842907.html



listed price new b-air.com
Price: $319.00 .
The B-Air GRIZZLY Blowers (#GP-1) come in a 1HP Motor



•1 HP
•3 Speed
•Exclusive Designed Fan for Maximum Output
•3.1 Inches of Static Pressure
•25 Ft Cord
•Easy to Carry Handle
•39 Lbs 115v



call me at 505-504-9560 gurulissa@aol.com

]]> 2009-12-04T11:33:42-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494842907.html text 2009-12-04T11:33:42-07:00 http://albuquerque.craigslist.org/tls/1494829705.html 2009-12-04T11:28:24-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494829705.html text 2009-12-04T11:28:24-07:00 http://albuquerque.craigslist.org/tls/1494796596.html Please call Jason - 690-3176

Thanks]]> 2009-12-04T11:09:57-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494796596.html text 2009-12-04T11:09:57-07:00 http://albuquerque.craigslist.org/tls/1494518513.html 2009-12-04T10:48:57-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494518513.html text 2009-12-04T10:48:57-07:00 http://albuquerque.craigslist.org/tls/1494706314.html $425.00 OBO
Call 505-362-4827]]> 2009-12-04T10:31:31-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494706314.html text 2009-12-04T10:31:31-07:00 http://albuquerque.craigslist.org/tls/1494710593.html 2009-12-04T10:26:38-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494710593.html text 2009-12-04T10:26:38-07:00 http://albuquerque.craigslist.org/tls/1494604744.html
http://www.executivehomeandgarden.com/diystoneveneermolds.html

919-601-4769




























]]> 2009-12-04T09:28:57-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494604744.html text 2009-12-04T09:28:57-07:00 http://albuquerque.craigslist.org/tls/1494588636.html
PRESSURE POTS
SAFETY EQUIPMENT
NOZZLES AND ACCESORIES

CONTACT ME @ 505-362-9414
PIONEER EQUIPMENT INC.]]> 2009-12-04T09:20:06-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494588636.html text 2009-12-04T09:20:06-07:00 http://albuquerque.craigslist.org/tls/1494522158.html 2009-12-04T08:41:45-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494522158.html text 2009-12-04T08:41:45-07:00 http://albuquerque.craigslist.org/tls/1494456990.html 2009-12-04T07:59:24-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494456990.html text 2009-12-04T07:59:24-07:00 http://albuquerque.craigslist.org/tls/1494317730.html 2009-12-04T05:06:26-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494317730.html text 2009-12-04T05:06:26-07:00 http://albuquerque.craigslist.org/tls/1494287105.html 3 DRAWER UTILITY TOOL CART HAS A STAINLESS STEEL SLIDING TOP THAT OPENS UP WITH CLOTH COVER & KEYS. ROYAL BLUE COLORED
#MB197UC-BL SUGGESTED PRICE NEW $849.99 PLUS THE COVER $60.00

call 505-304-4811 after 1pm]]> 2009-12-04T02:44:54-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494287105.html text 2009-12-04T02:44:54-07:00 http://albuquerque.craigslist.org/tls/1494275218.html saw with stand. in great condition, works great, hardly used, very clean, and new like!!]]> 2009-12-04T01:47:07-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494275218.html text 2009-12-04T01:47:07-07:00 http://albuquerque.craigslist.org/tls/1494273934.html the saw is a WORKFORCE 120v ac, 550w 4.6A 3.500/min. Max cutting depth: 1 3/8" blade dim: 7"x5/8" 3yr]]> 2009-12-04T01:41:38-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494273934.html text 2009-12-04T01:41:38-07:00 http://albuquerque.craigslist.org/tls/1494232288.html 2009-12-03T23:55:21-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494232288.html text 2009-12-03T23:55:21-07:00 http://albuquerque.craigslist.org/tls/1494234422.html 2009-12-03T23:47:06-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494234422.html text 2009-12-03T23:47:06-07:00 http://albuquerque.craigslist.org/tls/1494204947.html 2009-12-03T22:55:23-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494204947.html text 2009-12-03T22:55:23-07:00 http://albuquerque.craigslist.org/tls/1494199138.html 2009-12-03T22:46:35-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494199138.html text 2009-12-03T22:46:35-07:00 http://albuquerque.craigslist.org/tls/1494160060.html
Call 228-3134 or 898-1620.]]> 2009-12-03T21:53:41-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494160060.html text 2009-12-03T21:53:41-07:00 http://albuquerque.craigslist.org/tls/1494139691.html
Call 228-3134 or 898-1620]]> 2009-12-03T21:29:59-07:00 en-us Copyright © 2009 craigslist, inc. http://albuquerque.craigslist.org/tls/1494139691.html text 2009-12-03T21:29:59-07:00