loading
reading
writing
saving
searching
Yamaha - $300 (Albuquerque)
condition:
like new
make / manufacturer:
Yamaha
model name / number:
Power Amplifier P2500S
size / dimensions:
17 x 19 x 3
QR Code Link to This Post
Overview-
The P-Series amps are an ideal match to Yamaha's popular Club Series loudspeakers and deliver a robust amount of pro quality power in a wide range of configurations designed to suit most any need. To achieve this, they're designed with big power output, and equipped with YS (Yamaha Speaker) Processing to deliver a signal that is tuned to the needs of the Club Series loudspeakers. All models feature both XLR and 1/4" TRS inputs and Neutrik Speakon (tm), 1/4", and 5-way binding post outputs to make connections quick and easy. Other features include Yamaha's exclusive EEEngine technology which delivers high performance with exceptional efficiency, sweepable high and low pass filters for optimizing output to any loudspeakers, compact and durable 2U chassis, and variable speed cooling fans.
Big Output Power Delivered with Great Efficiency
The P-Series Power Amplifiers deliver a robust amount of professional quality power in a wide range of configurations designed to suit most any need. In a 4- ohm bridged application, the P7000S delivers 3200 watts, the P5000S delivers 2600 watts, the P3500S 2000 watts, and the P2500S 1300 watts.
Those on a budget will find the lineup's high power output and affordable prices deliver higher quality without putting a strain on funds. Further savings are realized with extremely efficient operation utilizing Yamaha's exclusive EEEngine technology which keeps operational costs down by significantly reducing AC power consumption and heat… read more
Specs-
Output Power
- 1kHz, THD+N=1% 8 Ohms Stereo: 275W + 275W
- 1kHz, THD+N=1% 4 Ohms Stereo: 390W + 390W
- 1kHz, THD+N=1% 8 Ohms Bridge: 780W
- 20Hz-20kHz, THD+N=1% 8 Ohms Stereo: 250W + 250W
- 20Hz-20kHz, THD+N=1% 4 Ohms Stereo: 310W + 310W
- 20Hz-20kHz, THD+N=1% 8 Ohms Bridge: 620W
- 1kHz, 20mS nonclip 2 Ohms Stereo: 650W + 650W
- 1kHz, 20mS nonclip 4 Ohms Bridge: 1300W
- Power Bandwidth (half power): 10Hz-40kHz (THD+N=0.5%)
- THD+N (20Hz - 20kHz, half power): Maximum 0.1%
- Intermodulation Distortion (60Hz: 7kHz, 4:1, half power: Maximum 0.1%
- Frequency Response: 0dB, +0.5dB, - 1dB f=20Hz-50kHz
- Channel Separation: Minimum 70dB 1kHz
- Residual noise (Att. min.): Maximum 70dB
- S/N Ratio: 100 dB
- Damping Factor: 200 max.
- Sensitivity @8 Ohms +3dB
- Voltage Gain (Att. max): 32.1dB
- Input Impedance: 30kOhms balanced; 15kOhms unbalanced
Controls
- Front Panel: POWER switch (push on/push off) attenuator (31position) x 2
- Rear Panel: MODE switch (STEREO/BRIDGE/PARALLEL), FILTER switch (SUB WOOFER/LOW CUT/OFF) x 2, FREQ. CONTROL (25Hz-150Hz) x 2, YAMAHA SPEAKER PROCESSING switch (ON/OFF)
Connectors
- Input: XLR-3-31 type/ch, 1/4 in.
- Output: SPEAKON, 5-way biding post, 1/4 in. phone/ch
Indicators
- POWER: x 1 (Green)
- PROTECTION: x 1 (Red)
- TEMP: x 1 (Red) heatsink temp 85 degrees
- YS PROCESSING: x 1 (Yellow)
- SIGNAL: x 2 (Green)
- CLIP: x 2 (Red)
Load Protection
- POWER switch on/off mute
- DC-fault power output cut
Amplifier Protection
- Thermal (heatsink temp 90 degrees C)
- VI limiter
- Limiter Circuit: Comp. THD 0.5%
- Cooling: Dual variable-speed fan / Single variable-speed fan
- Power Requirements: USA/120V 60Hz
- Idle Power Consumption: 25W
- 1/8 Power Consumption: 320W
- Maximum Power Consumption (4 Ohms): 1600W
- Dimensions (W x H x D): 18-7/8 in. x 3-7/16 in. x 17-15/16 in.
- Weight: 26.5 lbs
Documents and Manuals-
For support or warranty questions, please contact the manufacturer:
Phone: show contact info
Web: https://usa.yamaha.com/support
Owner's Manual